The function of bubble bag is mainly to protect the product from damage during transportation, but this does not only mean that only the bubble bag can be included, and the manufacturer of bubble bag should make full preparations.

1、应充分考虑物料或产品的特性采用合适的防护措施，防护措施的目的在于物料或产品在运输、转序、贮存时的性及延长产品质量的时效性；

1. Proper protective measures shall be taken to fully consider the characteristics of materials or products. The purpose of protective measures is to ensure the safety of materials or products during transportation, sequence transfer and storage and to extend the timeliness of product quality;

2、对于体积和重量较大的产品，如导轨、弹簧臂等产品，要特别注意包装的强度，确保在流通中不受损伤；

2. For products with large volume and weight, such as guide rail, spring arm and other products, pay special attention to the strength of packaging to ensure that they are not damaged in circulation;

3、操作人员在包装时必须采取戴工作手套或指套、轻拿轻放等措施，以保证物料或产品在运输、运输不受损伤；

3. Operators must wear working gloves or finger cots, handle with care and other measures during packaging to ensure that materials or products are not damaged during transportation and transportation;

4、物料或产品装入包装后必须保持封闭状态，可利用如胶带、纺织带、钉书机、封口机、打包机等材料或工具完成，封口必须牢靠；

4. The materials or products must be kept closed after being packed, which can be completed with materials or tools such as tape, textile belt, stapler, sealer, packer, etc., and the sealing must be firm;

5、所有包装材料内外表面均要求清洁并不致产生碎屑、粉尘、污染物等；

5. The internal and external surfaces of all packaging materials shall be clean and free from debris, dust, pollutants, etc;

6、对易损、易震、易潮产品，应采取在包装内加入抗震缓冲材料、干燥剂、防氧化剂等防护措施。

6. For vulnerable, shock prone and damp prone products, anti-seismic buffer materials, desiccant, anti oxidant and other protective measures shall be added into the package.

气泡袋厂家在确认以上步骤都完成后，应在外包装上有相应警示标识，如防倒置、怕湿、轻放等。

After confirming that all the above steps have been completed, the bubble bag manufacturer shall have corresponding warning signs on the outer package, such as anti inversion, anti humidity, handle with care, etc.