顺鑫塑料包装教您如果印刷胶带残留物?
发布于:2021/09/25
相信开车的朋友都接触过印刷胶带,如车内的不少小饰物、婚嫁扎彩车时用的印刷胶带、一些配件的合格证等等,当这些东西去除以后,常常会在车内或者车体外表留下难以去除的不干胶痕迹,揭不掉,又不能用硬物来刮。怎样办呢?
I believe all my friends who drive have been exposed to the printing tape, such as many small decorations in the car, the printing tape used for wedding and color car, the qualification certificate of some accessories, etc. when these things are removed, they often leave hard adhesive marks in the car or on the outside of the car body, which can not be removed, and can not be scraped with hard objects. What should we do?
理论中,发现以下两个办法不错:酒精去除印刷胶带法。用软布之类蘸取足量95%酒精,然后悄悄擦拭不干胶处,不干胶就会随便的变软脱离,同时酒精普通也不会对塑料件或者车漆外表有什么损伤。但有时会发现酒精对某些不干胶不是很有用,这是可用软布蘸取少许汽油轻擦不干胶处,此时应留意,印刷胶带因汽油对某种塑料或油漆有“溶解”作用,所以一定要当心运用:要么先在不重要的中 央轻擦察看一下,假如没问题就运用;但一定留意不要运用汽油太多,同时时间尽量要短!
In theory, the following two methods are found to be good: alcohol removing printing tape method. Dip a sufficient amount of 95% alcohol with a soft cloth, and then quietly wipe the self-adhesive. The self-adhesive will become soft and separate at will. At the same time, ordinary alcohol will not damage the appearance of plastic parts or car paint. However, it is sometimes found that alcohol is not very useful for some self-adhesive. You can use a soft cloth dipped in a little gasoline to gently wipe the self-adhesive. At this time, you should pay attention to that the printing tape must be used carefully because gasoline has a "dissolving" effect on a certain plastic or paint: either wipe it in an unimportant place first and use it if there is no problem; But be careful not to use too much gasoline, and the time should be as short as possible!
在车体外表用汽油短时间擦拭,对车体外表漆膜没什么明显的影响。这样一来,印刷胶带就很容易得就给肃清掉啦……买一瓶除胶剂才20几元,很多中 央都能够用。还能够用很长时间大门胶纸以及印刷胶带渍有办法去除吗用强 力胶纸贴些装饰品在大门上,此后除下,可见门上留下片片胶痕。可运用汽油或煤油抹去胶纸,亦可买1200号水砂纸喷水揩去斑迹,再买一罐透明清漆,用香蕉油调稀,以排笔刷一次即回复光亮。勿用去指甲油抹刷,虽可去了胶渍,可惜门会变成一幅白蒙蒙斑迹。
Wipe the car body surface with gasoline for a short time, which has no obvious effect on the paint film on the car body surface. In this way, the printing tape can be easily eliminated... It's only 20 yuan to buy a bottle of degumming agent, which can be used in many places. It can also be used for a long time. Is there a way to remove the door adhesive tape and printing tape stains? Stick some decorations on the door with strong adhesive tape. After that, it can be seen that pieces of adhesive marks are left on the door. You can use gasoline or kerosene to wipe off the adhesive tape, or you can buy 1200 water sandpaper to spray water to wipe off the spots, then buy a can of transparent varnish, dilute it with banana oil, and brush it once with a pen brush to restore brightness. Do not use nail polish to wipe, although you can go to glue stains, but the door will become a white spot.
印刷胶带:先以小刀刮下印刷胶带,再用石油精擦拭;毛玻璃则将胶带刮下后,以松节油擦拭。
Printing tape: first scrape off the printing tape with a knife, and then wipe it with petroleum essence; For the ground glass, scrape off the adhesive tape and wipe it with turpentine.
上一篇:塑料袋生产厂家常用两种材料的区别
下一篇:食品包装袋需不需要抽真空?
相关产品
-
珠光膜气泡信封袋
-
气泡快递袋
-
服装拉链袋
-
防震快递袋
相关新闻
- 济南服装拉链袋:服装拉链袋该何去何从?
- 济南OPP自粘袋:常用包装材料-OPP膜与PP膜的区别
- 济南OPP自粘袋:PE、PP、OPP等不同材质的自粘胶袋的区别
- 济南气泡信封袋:复合气泡袋 | 简约而不简单,电商包装新宠!
- 济南加厚快递袋 :快递袋都有哪些分类?
- 济南加厚快递袋有哪些种类?
- PE、PP、OPP等不同材质的自粘胶袋的区别
- 衣服包装袋选有孔防潮还是无孔防潮