气泡袋的泡径和厚度对其质量的影响

气泡袋的泡径和厚度是其重要的技术参数，影响着气泡袋的抗压能力和使用效果。

The diameter and thickness of the bubble bag are important technical parameters, which affect the compression resistance and effectiveness of the bubble bag.

泡径，即气泡的直径，常见的规格有6mm、10mm、20mm和28mm等。其中，10mm的泡径为常见，具有广泛的抗压范围。6mm的泡径气泡看起来整齐美观，特别适合与电话等外包装产品搭配，主要用于耐磨和皮带减震。而20~28mm的泡径则属于大泡，其薄膜的厚度会更厚，因此减震效果更好。

Bubble diameter, also known as the diameter of bubbles, is commonly specified as 6mm, 10mm, 20mm, and 28mm. Among them, a foam diameter of 10mm is common and has a wide compressive range. The 6mm bubble diameter looks neat and beautiful, especially suitable for pairing with external packaging products such as telephones, mainly used for wear resistance and belt shock absorption. However, bubbles with a diameter of 20-28mm belong to large bubbles, and their thin film thickness will be thicker, resulting in better shock absorption effect.

气泡袋的泡径和厚度对其质量的影响

The influence of bubble diameter and thickness on the quality of bubble bags

厚度则是指气泡袋薄膜的厚度，一般用每多少克来表示，类似于A4纸的克重。对于不同泡径的气泡袋，其厚度也有所不同。例如，10mm泡径的气泡袋，其厚度通常在35克/到100克/之间，也可以做得更厚，但成本会相应增加。6mm泡径的气泡袋，其厚度也基本在35克/到100克/之间，而根据经验，50~70克/的厚度对于这种小气泡来说较为合适。对于20~28mm的大泡径气泡袋，其厚度通常在100克/到200克/之间，常用的是200克/，这是因为泡径较大，如果厚度太薄，容易破裂。

Thickness refers to the thickness of the bubble bag film, usually expressed in grams per square meter, similar to the weight of A4 paper. The thickness of bubble bags varies for different bubble diameters. For example, a bubble bag with a diameter of 10mm typically has a thickness between 35 grams per square meter and 100 grams per square meter, and can also be made thicker, but the cost will increase accordingly. A bubble bag with a diameter of 6mm also has a thickness ranging from 35 grams per square meter to 100 grams per square meter. Based on experience, a thickness of 50-70 grams per square meter is more suitable for this type of small bubble. For large bubble bags with a diameter of 20-28mm, their thickness is usually between 100g/square meter and 200g/square meter, with the commonly used one being 200g/square meter. This is because the bubble diameter is large, and if the thickness is too thin, it is easy to break.